Photocatalytic degradation of methylene blue under visible light by cobalt ferrite nanoparticles/graphene quantum dots

• Vo Chau Ngoc Anh,
• Le Thi Thanh Nhi,
• Le Thi Kim Dung,
• Dang Thi Ngoc Hoa,
• Nguyen Truong Son,
• Nguyen Thi Thao Uyen,
• Nguyen Ngoc Uyen Thu,
• Le Van Thanh Son,
• Le Trung Hieu,
• Tran Ngoc Tuyen and
• Dinh Quang Khieu

Beilstein J. Nanotechnol. 2024, 15, 475–489, doi:10.3762/bjnano.15.43

• degradation of methylene blue (MB) under visible light. The catalyst can be recycled with an external magnetic field and displays suitable stability. Also, it was reused in three successive experiments with a loss of efficiency of about 5%. The CF/GQDs are considered as an efficient photocatalyst for MB

• degradation and other dyes. Keywords: cobalt ferrite; graphene quantum dots; methylene blue; Introduction Graphene quantum dots (GQDs) have unique properties, including photoluminescence, biocompatibility, slight chemical toxicity, inertness, and excellent photostability [1][2]. Graphene quantum dots

• /GQDs nanoparticles. Magnetic properties, morphology, structure, and fluorescence of the nanocomposites were studied, and the photocatalytic degradation of methylene blue as a dye model and the mechanism of methylene degradation were also addressed. Experimental Materials Cobalt(II) nitrate hexahydrate

Nanomaterials for photocatalysis and applications in environmental remediation and renewable energy

• Viet Van Pham and
• Wee-Jun Ong

Beilstein J. Nanotechnol. 2023, 14, 722–724, doi:10.3762/bjnano.14.58

• studies [20][21][22]. Besides, Nhu et al. [23] used rosin as a green chemical approach to fabricate ZnO nanoparticles, exhibiting a high photocatalytic activity for both methylene blue (100%) and methyl orange (82.78%) decomposition after 210 min under UV radiation. Moreover, the advantages in the

The microstrain-accompanied structural phase transition from h-MoO₃ to α-MoO₃ investigated by in situ X-ray diffraction

• Zeqian Zhang,
• Honglong Shi,
• Boxiang Zhuang,
• Minting Luo and
• Zhenfei Hu

Beilstein J. Nanotechnol. 2023, 14, 692–700, doi:10.3762/bjnano.14.55

• File 1 shows photodegradation experiments of methylene blue irradiated by ultraviolet light. The photodegradation rate of methylene blue was quantitatively estimated by pseudo-first-order kinetics. The reaction rate constants (k) are 0.01625, 0.01882, and 0.01258 min−1 for the samples calcinated at 300

Quercetin- and caffeic acid-functionalized chitosan-capped colloidal silver nanoparticles: one-pot synthesis, characterization, and anticancer and antibacterial activities

• Akif Hakan Kurt,
• Elif Berna Olutas,
• Fatma Avcioglu,
• Hamza Karakuş,
• Mehmet Ali Sungur,
• Cansu Kara Oztabag and
• Muhammet Yıldırım

Beilstein J. Nanotechnol. 2023, 14, 362–376, doi:10.3762/bjnano.14.31

• standard bacterial strains, 5% sheep blood agar and eosin methylene blue (EMB) media were used. The inoculated plates were kept in an oven at 35 ± 2 °C for 18–24 h. Sterile Müller Hinton broth fluid tubes were prepared in 0.5 McFarland turbidity standard for each bacterial strain. The bacteria were

Bismuth-based nanostructured photocatalysts for the remediation of antibiotics and organic dyes

• Akeem Adeyemi Oladipo and
• Faisal Suleiman Mustafa

Beilstein J. Nanotechnol. 2023, 14, 291–321, doi:10.3762/bjnano.14.26

• the chemical and biochemical oxygen demand and inhibits photosynthesis. Additionally, the uptake of dye molecules or their by-products in excess may be mutagenic, teratogenic, or carcinogenic [68][69]. Myocardial depression and hypertension are reportedly exacerbated by oral exposure to methylene blue

• shown adequate photocatalytic activity, a large specific surface area, and an abundance of channels, all of which are advantageous for photocatalysis. For instance, Dang et al. [123] used a microwave-assisted method to synthesise 3-D nanostructured Bi2WO6 nanoparticles and reported 92% methylene blue

• reported. Anwar et al. [189], for instance, reported that the photocatalytic degradation performance of both pollutants decreases with increasing initial concentrations of paracetamol and methylene blue dye. The decrease in the removal was attributed to the fact that high concentrations prevent light

Rapid and sensitive detection of box turtles using an electrochemical DNA biosensor based on a gold/graphene nanocomposite

• Abu Hashem,
• M. A. Motalib Hossain,
• Ab Rahman Marlinda,
• Mohammad Al Mamun,
• Khanom Simarani and
• Mohd Rafie Johan

Beilstein J. Nanotechnol. 2022, 13, 1458–1472, doi:10.3762/bjnano.13.120

• electrochemical impedance spectroscopy. The thiol-modified synthetic DNA probe was immobilised on modified SPCEs to facilitate hybridisation with the reverse complementary DNA. The turtle DNA was distinguished based on hybridisation-induced electrochemical change in the presence of methylene blue compared to

• differentiate BT DNA from DNAs of other animals by using differential pulse voltammetry (DPV) using methylene blue (MB) as a redox species. Results and Discussion Design of a unique probe for BT The identification and differentiation of different species is difficult because related species share many

• peptide nucleic acid (PNA) probes [64]. Methylene blue is a very prominent intercalator for DNA-based sensors and biosensors [31][65][66][67][68][69]. For example, Plaxco's group reported the preparation of electrode-immobilised methylene-blue-modified oligonucleotides for electrochemical DNA and aptamer

LED-light-activated photocatalytic performance of metal-free carbon-modified hexagonal boron nitride towards degradation of methylene blue and phenol

• Nirmalendu S. Mishra and
• Pichiah Saravanan

Beilstein J. Nanotechnol. 2022, 13, 1380–1392, doi:10.3762/bjnano.13.114

• plots) and charge trapping analysis confirmed the dominance of e−, O2−•, and •OH as dominant reactive oxygen species. The carbon modification could effectively remove 93.83% of methylene blue (MB, 20 ppm solution) and 48.56% of phenol (10 ppm solution) from the aqueous phase in comparison to HBN which

• -responsive material with improved charge carrier density (2.97 × 1019 cm−3). The LED light harvesting properties were analysed through various established characterization techniques and the photocatalysis was verified by eliminating the aqueous phase methylene blue (MB: 93.83%) and phenol (48.56%) moieties

Green synthesis of zinc oxide nanoparticles toward highly efficient photocatalysis and antibacterial application

• Vo Thi Thu Nhu,
• Nguyen Duy Dat,
• Le-Minh Tam and
• Nguyen Hoang Phuong

Beilstein J. Nanotechnol. 2022, 13, 1108–1119, doi:10.3762/bjnano.13.94

• electron microscopy, and high-resolution transmission electron microscopy. The fabricated ZnO NP samples are crystalline with a grain size of 30–100 nm. The ZnO NPs were used as catalysts for the photodegradation of methylene blue (MB) and methyl orange (MO) under visible and UV light. The results indicate

• applications. Nava et al. [26] prepared ZnO NPs using Camellia sinensis extracts and applied ZnO NPs to degrade methylene blue (MB). Ambika et al. [12] synthesized ZnO by a green method using a precursor from the Vitex negundo plant extract and zinc nitrate, and antimicrobial properties of ZnO NPs were

• ) and sodium hydroxide (NaOH) were provided by Xilong Scientific Co., Ltd. Methylene blue and methyl orange were purchased from Merck Co., Ltd. Nutrients and agar powder were provided by Titan Co., Ltd. All reagents were of analytical grade. ZnCl2 and NaOH were diluted in DI water with low conductivity

Recent advances in green carbon dots (2015–2022): synthesis, metal ion sensing, and biological applications

• Aisha Kanwal,
• Naheed Bibi,
• Sajjad Hyder,
• Arif Muhammad,
• Hao Ren,
• Jiangtao Liu and
• Zhongli Lei

Beilstein J. Nanotechnol. 2022, 13, 1068–1107, doi:10.3762/bjnano.13.93

• to have excellent biocompatibility with cells [70]. Ramanarayanan and Swaminathan utilized guava leaves to prepare CDs, which were then utilized for the synthesis of a CD-TiO2 nanocomposite. The CD-TiO2 nanocomposite possesses good photocatalytic ability to degrade methylene blue dye [71]. White

• was 17.2% [29]. Grass was used as a natural source to prepare immensely photoluminescent N-CDs through a hydrothermal method. Six different dyes, that is, acid blue, acid red, eosin Y, eriochrome black T, methyl orange, and methylene blue underwent degradation in the presence of radiation, which

Solar-light-driven LaFe_xNi_1−xO₃ perovskite oxides for photocatalytic Fenton-like reaction to degrade organic pollutants

• Chao-Wei Huang,
• Shu-Yu Hsu,
• Jun-Han Lin,
• Yun Jhou,
• Wei-Yu Chen,
• Kun-Yi Andrew Lin,
• Yu-Tang Lin and
• Van-Huy Nguyen

Beilstein J. Nanotechnol. 2022, 13, 882–895, doi:10.3762/bjnano.13.79

• decompose the methylene blue molecules. Accordingly, the synthesis condition of pH 0, calcination temperature at 700 °C, and Fe/Ni ratio = 7/3 could form LaFe0.7Ni0.3O3 perovskite oxides as highly efficient photocatalysts. Moreover, various conditions during the photocatalytic degradation were verified

• : LaFeO3; LaNiO3; methylene blue (MB); perovskite oxides; photocatalyst; Introduction With the advancement of science and technology, the world's population is increasing, leading to the fact that factories are consuming more and more resources. Water inevitably plays a vital role in industrial

• , methylene blue, and rhodamine B under visible light irradiation. Their optimal sample was LaFe0.85Cu0.15O3, which could remove dyes much more efficiently due to more generation of hydroxyl radicals than pure LaFeO3 [31]. Ni-doped LaFeO3 was ubiquitously employed as a photo/thermal catalyst or a catalyst

Sodium doping in brookite TiO₂ enhances its photocatalytic activity

• Boxiang Zhuang,
• Honglong Shi,
• Honglei Zhang and
• Zeqian Zhang

Beilstein J. Nanotechnol. 2022, 13, 599–609, doi:10.3762/bjnano.13.52

• , oxalic acid, and sodium hydroxide. It exhibits excellent photocatalytic activity in methylene blue solution (MB), which is about three times higher than that of the quasi-spherical brookite TiO2. The crystal structure of NaxTi1−xO2 was determined by the Rietveld refinement method and verified by the

• %), and methylene blue (≥98.0%) were purchased from Sinopharm Chemical Reagent Co. Tetrabutyl titanate (TBOT, ≥99.0%) and sodium hydroxide (≥98%) were purchased from Aladdin Biochemical Technology Co. Absolute ethanol (AR, ≥99.7%) was purchased from Beijing Innochem. Science & Technology Co. All reagents

• methylene blue (MB) solution at room temperature under UV light generated by a PLS-SXE300 Xenon lamp with a 365 nm band filter. Following the method reported by Wang et al. [22], 15 mg of the catalyst was dispersed into 75 mL of the MB solution (10 mg/L). Before UV light irradiation, the suspension was

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

• Ioana Marica,
• Fran Nekvapil,
• Maria Ștefan,
• Cosmin Farcău and
• Alexandra Falamaș

Beilstein J. Nanotechnol. 2022, 13, 472–490, doi:10.3762/bjnano.13.40

• to the LUMO of the analyte is in fact the dominant process. For example, spherical ZnO NPs of 45–50 nm diameter showed SERS activity by themselves, detecting nanomolar concentrations of methyl orange and methylene blue [8]. SERS effects can be obtained due to charge transfer between semiconductor

• band. According to the authors, one of the reasons for this phenomenon was the coupling between surface plasmon absorption of Au NPs and photoluminescence of ZnO nanorods. However, the ZnO–Au nanostructures showed a high SERS activity, demonstrated for methylene blue (MB) with a limit of detection of

A comprehensive review on electrospun nanohybrid membranes for wastewater treatment

• Senuri Kumarage,
• Imalka Munaweera and
• Nilwala Kottegoda

Beilstein J. Nanotechnol. 2022, 13, 137–159, doi:10.3762/bjnano.13.10

• eriochrome black T (EBT) are anionic dyes, while basic blue 41 (BB41), toluidine blue O (TBO), methylene blue (MB), methyl violet (MV), and rhodamine blue (RhB) are cationic organic dyes [74]. Textile, tannery, paper, cosmetics, pharmaceuticals, and food and paper industries are responsible for the release

The role of deep eutectic solvents and carrageenan in synthesizing biocompatible anisotropic metal nanoparticles

• Nabojit Das,
• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2021, 12, 924–938, doi:10.3762/bjnano.12.69

• emerged as a promising candidate for industrial applications. Silver nanoparticles synthesized using carrageenan as a reducing and stabilizing agent showed promising results in removing organic dyes such as methylene blue and rhodamine B [111]. Magnetic iron nanoparticles were synthesized using κ-, ι-, or

Comprehensive review on ultrasound-responsive theranostic nanomaterials: mechanisms, structures and medical applications

• Sepand Tehrani Fateh,
• Lida Moradi,
• Elmira Kohan,
• Michael R. Hamblin and
• Amin Shiralizadeh Dezfuli

Beilstein J. Nanotechnol. 2021, 12, 808–862, doi:10.3762/bjnano.12.64

Boosting of photocatalytic hydrogen evolution via chlorine doping of polymeric carbon nitride

• Malgorzata Aleksandrzak,
• Michalina Kijaczko,
• Wojciech Kukulka,
• Daria Baranowska,
• Martyna Baca,
• Beata Zielinska and
• Ewa Mijowska

Beilstein J. Nanotechnol. 2021, 12, 473–484, doi:10.3762/bjnano.12.38

• visible light compared to catalysts doped with one heteroatom [39]. Other studies showed that S- and P-doped photocatalysts showed significantly increased photocatalytic activity in the degradation of methylene blue under visible light compared to bulk PCN. The improvement was attributed to lone-pair

Unravelling the interfacial interaction in mesoporous SiO₂@nickel phyllosilicate/TiO₂ core–shell nanostructures for photocatalytic activity

• Bridget K. Mutuma,
• Xiluva Mathebula,
• Isaac Nongwe,
• Bonakele P. Mtolo,
• Boitumelo J. Matsoso,
• Rudolph Erasmus,
• Zikhona Tetana and
• Neil J. Coville

Beilstein J. Nanotechnol. 2020, 11, 1834–1846, doi:10.3762/bjnano.11.165

• systems and humanity. For instance, textile dyes of the methylene family, such as methylene blue (MB), methyl orange (MO), and methyl violet (MV), have detrimental toxicological and ecological effects on human life and the environment [1][2]. Thus, considerable efforts have been garnered towards finding

Nanocasting synthesis of BiFeO₃ nanoparticles with enhanced visible-light photocatalytic activity

• Thomas Cadenbach,
• Maria J. Benitez,
• A. Lucia Morales,
• Cesar Costa Vera,
• Luis Lascano,
• Francisco Quiroz,
• Alexis Debut and
• Karla Vizuete

Beilstein J. Nanotechnol. 2020, 11, 1822–1833, doi:10.3762/bjnano.11.164

• as rhodamine B (RhB), methyl orange, or methylene blue [8]. Due to the increasing demand for safe water, wastewater itself, coming from all types of industries including the textile industry, is considered to be a reliable alternative source of water. Thus, it is becoming part of the solution to the

Highly sensitive detection of estradiol by a SERS sensor based on TiO₂ covered with gold nanoparticles

• Andrea Brognara,
• Ili F. Mohamad Ali Nasri,
• Beatrice R. Bricchi,
• Andrea Li Bassi,
• Caroline Gauchotte-Lindsay,
• Matteo Ghidelli and
• Nathalie Lidgi-Guigui

Beilstein J. Nanotechnol. 2020, 11, 1026–1035, doi:10.3762/bjnano.11.87

• soaking in HAuCl4 solution, as composite SERS substrates for the detection of methylene blue. They reported a successful SERS enhancement, compared to bare Si substrates, with an enhancement factor of ca. 106 and a lower detection limit of 100 nM. Li et al. [15] studied Au NP-coated TiO2 nanotube arrays

Effect of Ag loading position on the photocatalytic performance of TiO₂ nanocolumn arrays

• Jinghan Xu,
• Yanqi Liu and
• Yan Zhao

Beilstein J. Nanotechnol. 2020, 11, 717–728, doi:10.3762/bjnano.11.59

• efficiency of methylene blue (MB) compared with Ag-coated TiO2 (ACT) nanocolumn arrays and pure TiO2 nanocolumns arrays. Both experimental and theoretical simulation results demonstrated that the enhanced photocatalytic performance of AFT nanocolumn arrays was attributed to the surface plasmon resonance (SPR

• , chromic acid (H2CrO4), and methylene blue (MB) were purchased from Alfa Aesar. Alcohol, perchloric acid (HClO4), and sulfuric acid (H2SO4) were purchased from Beijing Chemical Works. All the chemicals used in the experiments were of analytical grade and used without further purification. Method Anodized

• blue, methylene blue, etc. This article uses methylene blue (MB) as the dye molecule. To evaluate the influence of the different structures on the catalytic reaction, UV–vis photocatalytic experiments were carried out on different samples using MB solution as the reactant, as shown in Figure 7. In

Preparation, characterization and photocatalytic performance of heterostructured CuO–ZnO-loaded composite nanofiber membranes

• Wei Fang,
• Liang Yu and
• Lan Xu

Beilstein J. Nanotechnol. 2020, 11, 631–650, doi:10.3762/bjnano.11.50

• protection. Water pollution with organic dyes (such as congo red, methylene blue, and methyl orange) is becoming a major environmental problem. Therefore, water purification technologies, such as photocatalytic purification, electrochemical oxidation, membrane filtration, ozonation, and chlorination

Adsorptive removal of bulky dye molecules from water with mesoporous polyaniline-derived carbon

• Hyung Jun An,
• Jong Min Park,
• Nazmul Abedin Khan and
• Sung Hwa Jhung

Beilstein J. Nanotechnol. 2020, 11, 597–605, doi:10.3762/bjnano.11.47

• water contaminated with dyes, such as acid red 1 (AR1), Janus green B (JGB), methyl orange (MO) and methylene blue (MB), via adsorption. AR1 is a large anionic dye which is toxic and widely applied in the paper industry [44]. Janus green B (JGB) is one of the most typical large cationic dyes that is

• ), methyl orange (MO), methylene blue (MB) and Janus green B (JGB) over AC and KOH-900. Effect of contact time on (a) AR1 and (b) JGB adsorption over AC and KOH-900. (a) Adsorption isotherms and (b) Langmuir plots for the adsorption of AR1 from water over AC and KOH-900. Effect of pH on the adsorbed amounts

Synthesis and enhanced photocatalytic performance of 0D/2D CuO/tourmaline composite photocatalysts

• Changqiang Yu,
• Min Wen,
• Zhen Tong,
• Shuhua Li,
• Yanhong Yin,
• Xianbin Liu,
• Yesheng Li,
• Tongxiang Liang,
• Ziping Wu and
• Dionysios D. Dionysiou

Beilstein J. Nanotechnol. 2020, 11, 407–416, doi:10.3762/bjnano.11.31

• nontoxic products. In this work, a CuO/tourmaline composite with zero-dimensional/two-dimensional (0D/2D) CuO architecture was successfully obtained via a facile hydrothermal process, and its photocatalytic activity was evaluated by the degradation of methylene blue (MB). Surface element valence state and

Improved adsorption and degradation performance by S-doping of (001)-TiO₂

• Xiao-Yu Sun,
• Xian Zhang,
• Xiao Sun,
• Ni-Xian Qian,
• Min Wang and
• Yong-Qing Ma

Beilstein J. Nanotechnol. 2019, 10, 2116–2127, doi:10.3762/bjnano.10.206

• − at a ratio of RS/Ti = 1 and also in the form of S6+ replacing Ti4+ at RS/Ti ≥ 2. As a result, S-doping causes a lattice distortion, because the ionic radii of S2− and S6+ differ from that of the O2− and Ti4+ ions. (2) S-doping increases the adsorption coefficient Ae for methylene blue (MB) from 0.9

• photocatalytic activity was tested by the degradation of methylene blue (MB). For this, the samples were placed 20 cm away from a xenon lamp (300 W, 16 A). The experimental process was as follows: 50 mg of catalyst was added into a 100 mL MB solution with a concentration of 10 mg/L, and the samples were kept in

Direct observation of oxygen-vacancy formation and structural changes in Bi₂WO₆ nanoflakes induced by electron irradiation

• Hong-long Shi,
• Bin Zou,
• Zi-an Li,
• Min-ting Luo and
• Wen-zhong Wang

Beilstein J. Nanotechnol. 2019, 10, 1434–1442, doi:10.3762/bjnano.10.141

• of the sample was measured by the degradation of methylene blue under visible-light irradiation using a 300W Xe lamp, which is shown in Figure 1d. After irradiation for 3 h, the degradation efficiency of the sample increases to over 80%. This may result from the high concentration of surface dangling

• (condenser lens aperture) opening of 70 μm. Experiments of photocatalytic activity The photocatalytic activity of the samples was determined by measuring the degradation of methylene blue (MB) under visible-light irradiation using a 300 W Xe lamp with a 420 nm cut-off filter. In the experiment, 40 mg Bi2WO6